Named Pools QoS Policy Command Reference
728 Quality of Service Guide
Show Commands
show
—qos
— named-pool-policy
— named-pool-policy policy-name [detail]
— named-pool-policy policy-name association
— network-queue policy-id detail
— sap-egress policy-id detail
— sap-ingress policy-id detail
— shared-queue default detail
— slope-policy slope-name detail
show
— card card-slot detail | match “Named Pool Mode”
— mda slot detail
— mda slot qos [ingress | egress] buffer-allocation [detail]
— mda slot qos [ingress | egress] orphaned-queues
— pools port-id
— port port-id detail
Command Descriptions
Configuration Commands
Generic Commands
description
Syntax description description-string
no description
Context config>qos>named-pool-policy>q1-pools>pool
Description The description command is used to define an informational ASCII string for the named pool policy.
The string value may be defined or changed at anytime.
The no form of the command removes the explicit description string from the named pool policy.
To Next Page