QoS ATM Traffic Descriptor Profiles
Quality of Service Guide 709
Parameters sir value — Sustained Information Rate (including cell overhead) in kilobits per second.
Values 0 to 4294967295
pir value — Peak Information Rate (including cell overhead) in kilobits per second.
Values 0 to 4294967295
mir value — Minimum Desired Information Rate (including cell overhead) in kilobits per second.
Values 0 to 4294967295
mbs value — Maximum Burst Size in cells
Values 0 to 4294967295
cdvt cdvt-val — The Cell Delay Variation Tolerance (CDVT), in microseconds.
Default Depending upon a given service category:
CBR/RT-VBR/NRT-VBR 250
Values 0 to 4294967295
Show Commands
The command outputs in the following section are examples only; actual displays depend on
supported functionality and user configuration.
Table 55: ATM Traffic Parameter Defaults
Service Category Traffic Parameter Defaults
CBR:
PIR 0
rt-VBR and nrt-VBR
PIR 0
SCR 0
MBS 32
UBR (by default UBR is without MIR)
PIR 0
MIR 0
To Next Page
Loading...
