Overview
672 Quality of Service Guide
Default Advanced Policy Values
The default policies cannot be edited or deleted. Table 47 displays default advanced policy
parameters.
Deleting QoS Policies
Delete advanced policies from the following entities:
• Queue Group
• SAP Ingress
• SAP Egress
Queue Group
Use the following CLI syntax to delete advanced policies from ingress queue groups.
CLI Syntax: config> qos queue-group-templates ingress queue-group
group1 policer 1 no adv-config-policy
Use the following CLI syntax to delete advanced policies from egress queue groups.
CLI Syntax: config> qos queue-group-templates egress queue-group
group1 policer 1 no adv-config-policy
Table 47: Advanced Policy Parameter Defaults
Field Default
offered-measurement
high-rate-hold-time 0
time-average-factor 0
sample-interval 4
To Next Page
Loading...
