Advanced QoS Policies
Quality of Service Guide 673
SAP Ingress
Use the following CLI syntax to delete advanced policies from an ingress SAP.
CLI Syntax: qos sap-ingress 11 policer 1 adv-config-policy child1
queue 1 no adv-config-policy
SAP Egress
Use the following CLI syntax to delete advanced policies from an egress SAP.
CLI Syntax: qos sap-egress 11 policer 1 adv-config-policy child1
queue 1 no adv-config-policy
Copying and Overwriting Advanced Policies
You can copy an existing advanced policy, rename it with a new policy ID value, or overwrite
an existing policy ID. The overwrite option must be specified or an error occurs if the
destination policy ID exists.
CLI Syntax: config>qos> copy {adv-config-policy} source-policy-id
dest-policy-id [overwrite]
Editing Advanced Policies
You can change existing advanced policies and entries in the CLI or NMS. The changes are
applied immediately to all services where this policy is applied. To prevent configuration
errors copy the policy to a work area, make the edits, and then write over the original policy.
To Next Page
Loading...
