Alcatel-Lucent 7450 - Configuring Ingress Queue Group Templates

QoS Queue Group Template Command Reference
434 Quality of Service Guide
— stat-mode {no-stats | minimal | offered-profile-no-cir |
offered-priority-no-cir | offered-limited-profile-cir |
offered-profile-cir | offered-priority-cir | offered-total-
cir | offered-profile-capped-cir | offered-limited-
capped-cir}
—no stat-mode
— queue queue-id [queue-type] [create]
—no queue queue-id
— adaptation-rule [pir adaptation-rule] [cir adaptation-rule]
—no adaptation-rule
— adv-config-policy adv-config-policy-name
—no adv-config-policy
— burst-limit
—no burst-limit
— burst-limit size-in-kbytes
—no burst-limit
— cbs size-in-kbytes
—no cbs
— [no] dynamic-mbs
— hi-low-prio-only percent
—no hi-low-prio-only
— high-prio-only percent
—no high-prio-only
— mbs
size [bytes | kilobytes]
—no mbs
— parent scheduler-name [weight weight] [level level] [cir-
weight cir-weight] [cir-level cir-level]
—no parent
— packet-byte-offset {add bytes | subtract bytes}
—no packet-byte-offset
— percent-rate per-percent [cir cir-percent]
—no percent-rate
— pool pool-name
—no pool
— port-parent [weight weight] [level level] [cir-weight cir-
weight] [cir-level cir-level]
—no port-parent
— queue-delay delay
—no queue-delay
— rate pir-rate
[cir cir-rate]
—no rate
Configuring Ingress Queue Group Templates
config
—qos
— queue-group-templates
— ingress
— description description-string
—no description
— queue-group queue-group-name [create]