Quality of Service Guide 621
Slope QoS Policies
In This Section
This section provides information to configure slope QoS policies using the command line
interface.
Topics in this section include:
• Overview
• Basic Configurations
• Default Slope Policy Values
• Deleting QoS Policies
Overview
Default buffer pools exist (logically) at the port, FP or MDA and node levels. Each physical
port has three associated pool objects:
• Access ingress pool
• Access egress pool
• Network egress pool
Each MDA on FP1 hardware has four associated pool objects:
• Access egress pool
• Access ingress pool
• Acc-Ing MC Path Mgmt
• Network egress pool
Each FP on FP2 or higher based hardware has five associated pool objects:
• Access egress pool
• Access ingress pool
To Next Page