ATM QoS Policy Command Reference
702 Quality of Service Guide
ā port [port-id] atm pvt [vpi-range] [detail]
Command Descriptions
Configuration Commands
Generic Commands
description
Syntax description description-string
no description
Context config>qos>atm-td-profile
Description This command creates a text description stored in the configuration file for a configuration context.
The description command associates a text string with a configuration context to help identify the
context in the configuration file.
The no form of this command removes any description string from the context.
Default No description is associated with the configuration context.
Parameters description-string ā A text string describing the entity. Allowed values are any string up to 80
characters long composed of printable, 7-bit ASCII characters excluding double quotes. If the
string contains special characters (#, $, spaces, etc.), the entire string must be enclosed within
double quotes.
Operational Commands
copy
Syntax copy atm-td-profile src-prof dst-prof [overwrite]
Context config>qos
Description This command copies the source atm profile into the destination atm profile. If the destination profile
was already defined, the keyword 'overwrite' must be appended for the copy to complete.
To Next Page
Loading...
