Service SAP QoS Policy Command Reference
230 Quality of Service Guide
— avg-frame-overhead percent
—no avg-frame-overhead
— burst-limit
—no burst-limit
— cbs size-in-kbytes
—no cbs
— high-prio-only percent
— no high-prio-only
— mbs size [bytes | kilobytes]
—no mbs
— packet-byte-offset add add-bytes
— packet-byte-offset subtract sub-bytes
—no packet-byte-offset
— parent scheduler-name [weight weight] [level level] [cir-weight cir-weight]
[cir-level cir-level]
—no parent
— percent-rate pir-percent [cir cir-percent] [port-limit | local-limit]
—no percent-rate
— [no] pool pool-name
— port-parent [
weight weight] [level level] [cir-weight cir-weight] [cir-level
cir-level]
—no port-parent
— rate pir-rate [cir cir-rate]
—no rate
— wred-queue [policy slope-policy-name] [mode {native | pool-per-queue}]
[slope-usage {default | exceed-low}]
—no wred-queue
— scope {exclusive | template}
—no scope
— sub-insert-shared-pccrule start-entry entry-id count count
—no sub-insert-shared-pccrule
config
—qos
— match-list
— ip-prefix-list ip-prefix-list-name [create]
—no ip-prefix-list ip-prefix-list-name
— description string
—no description
— prefix ip-prefix/prefix-length
—no
prefix ip-prefix/prefix-length
Operational Commands
config
—qos
— copy sap-egress src-pol dst-pol [overwrite]
— copy sap-ingress src-pol dst-pol [overwrite]
— copy hsmda-pool-policy src-name dst-name [overwrite]
— copy hsmda-scheduler-policy src-name dst-name [overwrite]
— copy hsmda-slope-policy src-name dst-name [overwrite]
To Next Page