Service Egress and Ingress QoS Policies
Quality of Service Guide 221
description "Used on VPN sap"
queue 1 create
exit
queue 2 multipoint create
exit
queue 10 create
parent "VPN_be"
rate 11000
exit
...
---------------------------------------------
A:ALA-7>config>qos#
Deleting QoS Policies
Every service SAP is associated, by default, with the appropriate egress or ingress policy
(policy-id 1). You can replace the default policy with a customer-configured policy, but you
cannot entirely remove the policy from the SAP configuration. When you remove a non-
default service egress or ingress policy, the association reverts to the default policy-id 1.
A QoS policy cannot be deleted until it is removed from all SAPs where they are applied.
A:ALA-7>config>qos# no sap-ingress 100
MINOR: CLI SAP ingress policy "100" cannot be removed because it is in use.
A:ALA-7>config>qos#
Remove a Policy from the QoS Configuration
CLI Syntax: config>qos# no sap-ingress policy-id
Example: config>qos# no sap-ingress 100
config>qos# no sap-egress 1010
To Next Page
Loading...
