QoS Scheduler Policies
Quality of Service Guide 557
SR7>config>qos# no scheduler-policy SLA2
MINOR: QOS #1003 The policy has references
SR7>config>qos#
Removing a QoS Policy from a Customer Multi-Service Site
CLI Syntax: config>service>customer customer-id
multi-service-site customer-site-name
egress
no scheduler-policy
ingress
no scheduler-policy
Example: config>service>customer# multi-service-site “Test”
config>service>cust>multi-service-site# ingress
config>service>cust>multi-service-site>ingress# no
scheduler-policy
Removing a QoS Policy from SAP(s)
CLI Syntax: config>service# {epipe | vpls} service-id [customer
customer-id]
sap sap-id
egress
no scheduler policy
ingress
no scheduler policy
Example: config>service# epipe 6
config>service>epipe# sap sap 1/1/9:0
config>service>epipe>sap# egress
config>service>epipe>sap>egress# no scheduler-policy
config>service>epipe>sap>egress# exit
config>service>epipe>sap# ingress
config>service>epipe>sap>ingress#
config>service>epipe>sap>ingress# no scheduler-policy
The following syntax and example apply to the 7750 SR and 7950 XRS.
CLI Syntax: config>service# {ies | vprn} service-id [customer
customer-id]
interface ip-int-name
To Next Page
Loading...
