Alcatel-Lucent 7450 - Show Commands

QoS Queue Group Template Command Reference
466 Quality of Service Guide
offered-profile-capped-cir — Selects offered profile capped statistics as the statistics mode.
offered-limited-capped-cir — Selects offered limited capped statistics as the statistics mode.
Show Commands
The command outputs in the following section are examples only; actual displays may differ
depending on supported functionality and user configuration.
queue-group
Syntax queue-group [queue-group-name] [ingress | egress] [association | detail | summary]
queue-group summary
Context show>qos
Description This command displays queue-group information.
Parameters queue-group-name — Specifies the name of an existing queue group template up to 32 characters
in length.
ingress — Specifies whether the queue group name is an ingress policy.
egress — Specifies whether the queue group name is an egress policy.
associations — Displays the entities associated with the specified queue group name.
detail — Displays detailed queue group information for the specified queue group name.
summary — Displays the total number of queue-group instance per card (IOM or XCM).
Output
Sample Output
*A:Dut-T>cfg>qos>qgrps>egr>qgrp# show qos queue-group egress
===============================================================================
Queue Group Egress
===============================================================================
Group-Name Description
-------------------------------------------------------------------------------
QG_egress_1 Egress queue group
===============================================================================
*A:Dut-T#
*A:Dut-T# show qos queue-group egress QG_egress_1 detail
===============================================================================
QoS Queue-Group Egress
===============================================================================
-------------------------------------------------------------------------------
QoS Queue Group