Alcatel-Lucent 7450 - Configuring Queue Group on Ethernet Access Egress Port

Queue Sharing and Redirection
Quality of Service Guide 425
ingress
queue-group "QG_ingress_1" create
queue-overrides
queue 2 create
rate 800000 cir 20000
exit
exit
exit
exit
egress
queue-group "QG_egress_1" create
exit
exit
exit
exit
no shutdown
----------------------------------------------
*A:Dut-T>config>port# /configure port 9/2/2
*A:Dut-T>config>port# info
----------------------------------------------
ethernet
mode access
access
ingress
queue-group "QG_ingress_1" create
exit
exit
egress
queue-group "QG_egress_1" create
queue-overrides
queue 3 create
rate 1500000 cir 2000
exit
exit
exit
exit
exit
exit
no shutdown
----------------------------------------------
*A:Dut-T>config>port#
Configuring Queue Group on Ethernet Access Egress Port
The provisioning steps involved in using a queue-group queue on an egress access port are:
• Queue Group Template Creation
→ Create the queue group template in the egress context
→ Create the queue within the queue group template
• Queue Group Creation