Shared-Queue QoS Policy Command Reference
658 Quality of Service Guide
Command Descriptions
Configuration Commands
Generic Commands
description
Syntax description description-string
no description
Context config>qos>shared-queue
Description This command creates a text description stored in the configuration file for a configuration context.
The description command associates a text string with a configuration context to help identify the
context in the configuration file.
The no form of this command removes any description string from the context.
Default No description is associated with the configuration context.
Parameters description-string — A text string describing the entity. Allowed values are any string up to 80
characters long composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
Shared Queue QoS Commands
shared-queue
Syntax shared-queue policy-name
Context config>qos
Description This command enables the context to modify the QoS default shared-queue policy.
Parameters policy-name — The name of the default shared-queue policy.
Values default
To Next Page
Loading...
