HSMDA Features
794 Quality of Service Guide
Configuring HSMDA Queue Group Overrides
When a queue group template is instantiated at the port, queue group queues can be
overridden at the instance level using hsmda-queue-overrides.
The following display output displays a hsmda-queue-group and overrides example
configuration at the port level.
*A:Dut-A>config>port>ethernet# /configure port 4/1/1
*A:Dut-A>config>port# info
----------------------------------------------
shutdown
ethernet
mode access
egress
exp-secondary-shaper "Exp_Shaper_1" create
exit
exit
access
egress
queue-group "100" instance 1 create
hsmda-queue-override
secondary-shaper "Exp_Shaper_1"
wrr-policy "wrrRes"
packet-byte-offset add 3
queue 2 create
rate 2222
exit
exit
exit
exit
exit
exit
----------------------------------------------
Applying HSMDA Policies
HSMDA policies and values are associated in the following entities. Refer to the Interface
Configuration Guide for command syntax and usage.
config
—lag
— port-type {standard | hsmda-ports}
— no port-type
— port
—ethernet
— access
— egress
— queue-group queue-group-name [create] [instance instance-id]
— [no] hsmda-queue-override
To Next Page
Loading...
