Alcatel-Lucent 7450 - Page 791

High Scale Ethernet MDA Capabilities
Quality of Service Guide 793
*A:ALA-48>config>qos#
HSMDA Slope Policies
The following displays details of the default HSMDA slope policy configuration.
A:ALA-48>config>qos#
--------------------------------------------------
...
hsmda-slope-policy "default" create
description "Default hsmda slope policy."
queue-mbs 16800
high-slope
start-depth 100.00
max-depth 100.00
max-prob 100.00
no shutdown
exit
low-slope
start-depth 90.00
max-depth 90.00
max-prob 100.00
no shutdown
exit
exit
...
--------------------------------------------------
A:ALA-48>config>qos#
Egress Queue Group
The following displays details of the default HSMDA egress queue group configuration.
config
qos
queue-group-templates
egress
queue-group group-name
hsmda-queues
low-burst-max-class class
packet-byte-offset {add add-bytes | subtract sub-bytes}
wrr-policy wrr-policy-name
queue queue-id [create]
adaptation-rule pir adaptation-rule [cir adaptation-rule]
burst-limit size [bytes | kilobytes]
mbs mbs
rate pir-rate [cir cir-rate]
slope-policy hsmda-slope-policy-name
wrr-weight weight
exit