Alcatel-Lucent 7450 - Applying Network Queue Policies; Xmas and Mdas

Network Queue QoS Policies
Quality of Service Guide 151
exit
fc be create
multicast-queue 9
queue 1
exit
fc ef create
multicast-queue 14
queue 6
exit
fc h1 create
multicast-queue 15
queue 7
exit
fc h2 create
multicast-queue 13
queue 5
exit
fc l1 create
multicast-queue 12
queue 4
exit
fc l2 create
multicast-queue 10
queue 2
exit
fc nc create
multicast-queue 16
queue 8
exit
Applying Network Queue Policies
Apply network queue policies to the following entities:
• XMAs and MDAs
• Ethernet Ports
• SONET/SDH Ports
XMAs and MDAs
Use the following CLI syntax to apply a network queue policy to an XMA or MDA network
ingress port:
CLI Syntax: config>card
mda mda-slot
network
ingress
queue-policy name