Named Pools QoS Policy Command Reference
756 Quality of Service Guide
pools
Syntax pools port-id
Context show
Description This command displays XMA, MDA, or port pools. If the pool size is zero, there are no queues
associated with the pool and the pool is not in use (configured but not instantiated). To display details
about an ingress/egress named pool, use the command show pools 1/2 ingress | egress p2. The output
of the command shows which queues are using the named pool specified.
Output
Sample Output
A:SR7-10# show pools 1/2
===============================================================================
Type Id App. Pool Name Actual ResvCBS PoolSize
Admin ResvCBS
-------------------------------------------------------------------------------
MDA 1/2 Acc-Ing default 4096 8192
50%
MDA 1/2 Acc-Ing MC Path Mgnt 10240 20480
50%
MDA 1/2 Acc-Egr default 7168 14336
50%
MDA 1/2 Net-Ing default 5120 12288
40%
MDA 1/2 Net-Egr default 12288 24576
50%
MDA 1/2 Ingress p1 0 0
Policy: test 30%
MDA 1/2 Ingress p2 4096 12288
Policy: test 30%
MDA 1/2 Ingress p3 4096 12288
Policy: test 30%
===============================================================================
To Next Page
Loading...
