Named Pools
Quality of Service Guide 753
testOrig p1
===============================================================================
..
A:ALA-A>show>qos#
card
Syntax card card-slot detail | match “Named Pool Mode”
Context show
Description This command checks the card specified named pool mode.
Output
Sample Output
show card 1 detail | match "Named Pool Mode"
======================================================
Named Pool Mode : Configured (Enabled)
======================================================
mda
Syntax mda slot detail
mda slot qos [ingress | egress] buffer-allocation [detail]
mda slot qos [ingress | egress] orphaned-queues
Context show
Description This command displays named pool policies configured for an XMA or MDA.
Output
Sample Output
show mda 1/2 detail
-------------------------------------------------------------------------------
QOS Settings
-------------------------------------------------------------------------------
Ing. Named Pool Policy : test
Egr. Named Pool Policy : test
===============================================================================
A:SR7-10# show mda 1/2 qos ingress buffer-allocation
Total buffer space: 122605 kBytes
Total default buffer space (kBytes): Access: 8171 Network: 12256
Total mda buffer space (kBytes): Access: 16347 Network: 61306
===============================================================================
Port Allocation Weights
To Next Page
Loading...
