Network QoS Policy Command Reference
100 Quality of Service Guide
Parameters network src-pol dst-pol — Indicates that the source and destination policies are network policy
IDs. Specify the source policy that the copy command will copy and specify the destination
policy to which the command will duplicate the policy to a new or different policy ID.
Values 1 to 65535
overwrite — Specifies to replace the existing destination policy. Everything in the existing
destination policy will be overwritten with the contents of the source policy. If overwrite is
not specified, an error will occur if the destination policy ID exists.
SR>config>qos# copy network 1 427
MINOR: CLI Destination "427" exists use {overwrite}.
SR>config>qos# copy network 1 427 overwrite
scope
Syntax scope {exclusive | template}
no scope
Context config>qos>network
Description This command configures the network policy scope as exclusive or template. The policy’s scope
cannot be changed if the policy is applied to an interface.
The no form of this command sets the scope of the policy to the default of template.
Default template
Parameters exclusive — When the scope of a policy is defined as exclusive, the policy can only be applied to
one interface. If a policy with an exclusive scope is assigned to a second interface an error
message is generated. If the policy is removed from the exclusive interface, it will become
available for assignment to another exclusive interface.
The system default policies cannot be put into the exclusive scope. An error will be generated
if scope exclusive is executed in any policies with a policy-id equal to 1.
template — When the scope of a policy is defined as template, the policy can be applied to
multiple interfaces on the router.
Default QoS policies are configured with template scopes. An error is generated if you try to
modify the template scope parameter to exclusive scope on default policies.
Multi-Link Frame Relay Commands
The commands described in this section apply only to the 7450 ESS and 7750 SR.
mc-fr-profile-ingress
Syntax [no] mc-fr-profile-ingress profile-id
To Next Page
Loading...
