Network QoS Policies
Quality of Service Guide 101
Context config>qos
Description This command creates a profile for the user to configure the ingress QoS parameters of a Multi-Link
Frame Relay (MLFR) bundle. A maximum of 128 ingress QoS profiles may be created on the system.
The no form of this command deletes the profile.
Default none
Parameters profile-id — Specifies the profile number.
Values 1 to 65535
class
Syntax class class-id
Context config>qos>mc-fr-profile-ingress
config>qos>mc-fr-profile-egress
Description This command provides the Frame Relay scheduling class context for the user to configure the ingress
or egress QoS parameters of an MLFR bundle or an FRF.12 UNI/NNI link for this profile.
Default none
Parameters class-id — Specifies the Frame Relay scheduling class number.
Values 0 to 3
reassembly-timeout
Syntax reassembly-timeout timeout-value
no reassembly-timeout
Context config>qos>mc-fr-profile-ingress>class
Description This command configures the value of the MLFR bundle ingress per-class reassembly timer for the
profile.
Default Class 0=10 msec
Class 1=10 msec
Class 2=100 msec
Class 3=1000 msec
Parameters timeout-value — Specifies the timeout value, in milliseconds.
Values 1 to 1000
To Next Page
Loading...
