Network Queue QoS Policy Command Reference
186 Quality of Service Guide
A:ALA-12# show qos network-queue nq1
==============================================================================
QoS Network Queue Policy
==============================================================================
Network Queue Policy (nq1)
------------------------------------------------------------------------------
Policy : nq1
Description : (Not Specified)
------------------------------------------------------------------------------
Associations
------------------------------------------------------------------------------
Port-id : 1/1/1
==============================================================================
A:ALA-12>show>qos#
A:ALA-12>show>qos# network-queue nq1 detail
==============================================================================
QoS Network Queue Policy
==============================================================================
Network Queue Policy (nq1)
------------------------------------------------------------------------------
Policy : nq1
Description : (Not Specified)
------------------------------------------------------------------------------
Queue CIR PIR CBS MBS HiPrio
------------------------------------------------------------------------------
1 0 100 1 50 10
2 25 100 5 50 10
3 25 100 20 50 10
Table 27: Network Queue Labels and Descriptions
Label Description
Policy The policy name that uniquely identifies the policy.
Description A text string that helps identify the policy’s context in the configuration file.
Port-Id Displays the physical port identifier where the network queue policy is applied.
Queue Displays the queue ID.
CIR Displays the committed information rate.
PIR Displays the peak information rate.
CBS Displays the committed burst size.
MBS Displays the maximum burst size.
HiPrio Displays the high priority value.
FC Displays FC to queue mapping.
UCastQ Displays the specific unicast queue to be used for packets in the forwarding
class.
To Next Page
Loading...
