Service SAP QoS Policy Command Reference
258 Quality of Service Guide
description
Syntax description description-string
no description
Context config>qos>sap-ingress>policer
Description The description command is used to define an informational ASCII string associated with the policer
control policy. The string value can be defined or changed at any time once the policy exists.
The no form of this command is used to remove an explicit description string from the policer.
Default no description
Parameters description-string — The description-string parameter defines the ASCII description string for
the policer control policy. The description string can be up to 80 characters. If the string
contains spaces, it must be placed within beginning and ending double quotation marks.
Beginning and ending quotation marks are not considered part of the description string. Only
printable ASCII characters are allowed in the string. The sting does not need to be unique and
may be repeated in the descriptions for other policer control policies or other objects. If the
command is executed without the description-sting present, any existing description string
will be unaffected.
Default None
adv-config-policy
Syntax [no] adv-config-policy policy-name
Context config>qos>sap-ingress>policer
config>qos>sap-egress>policer
Description This command specifies the advanced QoS policy. The advanced QoS policy contains only queue and
policer child control parameters within a child-control node.
Once a policy is created, it may be applied to a queue or policer defined within a sap-egress or sap-
ingress QoS policy. It may also be applied to a queue or policer defined within an ingress or egress
queue-group template. When a policy is currently associated with a QoS policy or template, the policy
may be modified but not deleted (even in the event that the QoS policy or template is not in use).
The no form of this command removes the specified advanced policy.
Default None
Parameters policy-name — The name of the advanced QoS policy.
Values Valid names consist of any string up to 63 characters long
composed of printable, 7-bit ASCII characters. If the string
contains special characters (#, $, spaces, etc.), the entire string
must be enclosed within double quotes.
To Next Page
Loading...
