Service SAP QoS Policy Command Reference
304 Quality of Service Guide
config>qos>sap-egress>ipv6-criteria>entry
Description This command creates a context to configure match criteria for ingress SAP QoS policy match IPv6
criteria. When the match criteria have been satisfied the action associated with the match criteria is
executed.
If more than one match criteria (within one match statement) are configured, then all criteria must be
satisfied (AND function) before the action associated with the match is executed.
A match context can consist of multiple match criteria, but multiple match statements cannot be
entered per entry.
It is possible that a SAP ingress policy includes the dscp map command, the dot1p map command, and
an IPv6 match criteria. When multiple matches occur for the traffic, the order of precedence is used to
arrive at the final action. The order of precedence is as follows:
1. 802.1p bits
2. DSCP
3. IP Quintuple or MAC headers
The no form of this command removes the match criteria for the entry-id.
Parameters next-header next-header — Specifies the next header to match.
On the 7750 SR and 7950 XRS, the protocol type such as TCP / UDP / OSPF is identified by
its respective protocol number. Well-known protocol numbers include ICMP(1), TCP(6),
UDP(17).
Values protocol numbers accepted in DHB: 0 to 42, 45 to 49, 52 to 59, 61
to 255
keywords: none, crtp, crudp, egp, eigrp, encap, ether-ip, gre,
icmp, idrp, igmp, igp, ip, ipv6, ipv6-icmp, ipv6-no-nxt, isis, iso-
ip, l2tp, ospf-igp, pim, pnni, ptp, rdp, rsvp, stp, tcp, udp, vrrp
* — udp/tcp wildcard
match
Syntax match [frame-type {802dot3 | 802dot2-llc | 802dot2-snap | ethernet-II | atm}]
no match
Context config>qos>sap-ingress>mac-criteria>entry
Description This command creates a context for entering/editing match MAC criteria for ingress SAP QoS policy
match criteria. When the match criteria have been satisfied the action associated with the match criteria
is executed.
If more than one match criteria (within one match statement) are configured then all criteria must be
satisfied (AND function) before the action associated with the match will be executed.
To Next Page
Loading...
