Service SAP QoS Policy Command Reference
308 Quality of Service Guide
The forwarding class queue mappings may be modified at anytime. The sub-forwarding classes inherit
the parent forwarding classes queue mappings.
The no form of the command returns the HSMDA queue mapping for queue to the default mapping
for the forwarding class.
Parameters queue-id — Configures a specific HSMDA queue.
Values
mbs
Syntax mbs {size [bytes | kilobytes] | default}
no mbs
Context config>qos>sap-egress>hsmda-queues>queues
Table 31: Ingress HSMDA Queue Mapping Behavior Based on Forwarding Type
Queue Mappings For Each Forwarding Type
Service Type Queue Broadcast Multicast Unknown
Epipe All packets matching
the FC
None None None
IES All packets matching
the FC
Packets with Broadcast
DA
IP Multicast Packets None
VPLS All packets matching
the FC
Packets with Broadcast
DA
Packets with Multicast
DA
Packets with Unicast
DA but Unknown in
FIB
VPRN All packets matching
the FC
Packets with Broadcast
DA
IP Multicast Packets None
1 to 8
BE Default: 1
L2 Default: 2
AF Default: 3
L1 Default: 4
H2 Default: 5
EF Default: 6
H1 Default: 7
NC Default: 8
To Next Page
Loading...
