Service Egress and Ingress QoS Policies
Quality of Service Guide 315
To select a range from 4 up to 7 specify p-value of 4 and a mask of 0b100 for value and mask.
Default 7 (decimal) (exact match)
Values 1 to 7 (decimal)
dsap
Syntax dsap dsap-value [dsap-mask]
no dsap
Context config>qos>sap-ingress>mac-criteria>entry
Description Configures an Ethernet 802.2 LLC DSAP value or range for an ingress SAP QoS policy match
criterion.
This is a one-byte field that is part of the 802.2 LLC header of the IEEE 802.3 Ethernet Frame.
The snap-pid field, etype field, ssap and dsap fields are mutually exclusive and cannot be part of the
same match criteria.
Use the no form of this command to remove the dsap value as the match criterion.
Default None
Parameters dsap-value — The 8-bit dsap match criteria value in hexadecimal.
Values 0x00 to 0xFF (hex)
dsap-mask — This is optional and can be used when specifying a range of dsap values to use as
the match criteria.
This 8 bit mask can be configured using the following formats:
Default FF (hex) (exact match)
Values 0x00 to 0xFF (hex)
Hexadecimal 0xH 0x4
Binary 0bBBB 0b100
Format Style Format Syntax Example
Format Style Format Syntax Example
Decimal DDD 240
Hexadecimal 0xHH 0xF0
Binary 0bBBBBBBBB 0b11110000
To Next Page
Loading...
