Service SAP QoS Policy Command Reference
326 Quality of Service Guide
The hardware also needs to adapt the given mbs and cbs values into the PIR bucket violate threshold
(discard) and the CIR bucket exceed threshold (out-of-profile). The hardware may not have an exact
threshold match which it can use. In R8.0, the system treats the mbs and cbs values as minimum
threshold values.
The no form of this command is used to return the policer’s metering and profiling hardware
adaptation rules to closest.
Parameters pir {max | min | closest} — When the optional pir parameter is specified, the max, min or
closest keyword qualifier must follow.
max — The max keyword is used to inform the system that the metering rate defined for the
policer is the maximum allowed rate. The system will choose a hardware supported rate that
is closest but not exceeding the specified rate.
min — The min keyword is used to inform the system that the metering rate defined for the
policer is the minimum allowed rate. The system will choose a hardware supported rate that
is closest but not lower than the specified rate.
closest — The closest keyword is used to inform the system that the metering rate defined for the
policer is the target rate. The system will choose a hardware supported rate that is closest to
the specified rate.
Default closest
cir {max | min | closest} — When the optional cir parameter is specified, the max, min or closest
keyword qualifier must follow.
max — The max keyword is used to inform the system that the profiling rate defined for the
policer is the maximum allowed rate. The system will choose a hardware supported rate that
is closest but not exceeding the specified rate.
min — The min keyword is used to inform the system that the profiling rate defined for the policer
is the minimum allowed rate. The system will choose a hardware supported rate that is closest
but not lower than the specified rate.
closest — The closest keyword is used to inform the system that the profiling rate defined for the
policer is the target rate. The system will choose a hardware supported rate that is closest to
the specified rate.
Default closest
cbs
Syntax cbs {size [bytes | kilobytes] | default}
no cbs
Context config>qos>sap-egress>policer
To Next Page
Loading...
