Service Egress and Ingress QoS Policies
Quality of Service Guide 381
Parameters policy-id — Displays information about the specific policy ID.
Values 1 to 65535
detail — Displays detailed policy information including policy associations.
Output
Sample Output
A:ALA-49# show qos sap-egress
===============================================================================
Sap Egress Policies
===============================================================================
Policy-Id Scope Description
-------------------------------------------------------------------------------
1 Template Default SAP egress QoS policy.
1010 Template
1020 Template
===============================================================================
A:ALA-49#
A:ALA-49# show qos sap-egress 1010
===============================================================================
QoS Sap Egress
===============================================================================
-------------------------------------------------------------------------------
Sap Scheduler Policy (1010)
FC Name Specifies the forwarding class queue mapping or dot1p marking is to be
edited.
Queue-id Specifies the queue-id that uniquely identifies the queue within the policy.
Explicit/Default Explicit
Specifies the egress IEEE 802.1p (dot1p) bits marking for fc-name.
Default
Specifies that the default dot1p value (0) is used.
Service Association
Service-Id The unique service ID number which identifies the service in the service
domain.
Customer-Id Specifies the customer ID which identifies the customer to the service.
SAP Specifies the a Service Access Point (SAP) within the service where the
policy is applied.
Mirror SAPs:
Mirror Dest Specifies the mirror service ID which identifies the service in the service
domain.
SAP Specifies the a Service Access Point (SAP) within the service where the
SAP egress policy is applied.
Label Description (Continued)
To Next Page
Loading...
