Service Egress and Ingress QoS Policies
Quality of Service Guide 387
member-queues [at-risk-only] — The member-queues optional keyword is used to include a list
of all queues attached to the specified burst-control-group-name. The optional at-risk-only
keyword may be added to limit the displayed queues to only include queues that are
considered ‘at-risk’ for inaccurate shaping based on 100% worst case scheduling bandwidth
for the current queue mappings. The 100% scheduling bandwidth used in the ‘at-risk’
determination may be overridden with a specified scheduling bandwidth by using the exp-
util-bw parameter.
exp-util-bw — An optional keyword used to display a calculated worst case visitation rate for the
specified burst-control-group-name based on the specified value for megabits-per-second.
megabits-per-second — A value also modifies the member-queues ‘at-risk’ state output.
To Next Page
Loading...
