Queue Sharing and Redirection
Quality of Service Guide 489
-------------------------------------------------------------------------------
HSMDA Associations
-------------------------------------------------------------------------------
No Associations Found.
===============================================================================
*A:Dut-T>config>port#
sap-ingress
Syntax sap-ingress [policy-id] [association | match-criteria | hsmda | detail]
Context show>qos
Description This command displays SAP ingress QoS policy information. Queue group information is displayed
in the FC section.
Parameters policy-id — The SAP egress policy ID that uniquely identifies the policy.
association — Displays the entities associated with the specified policy ID.
match-criteria — Displays match criteria when this keyword is specified.
hsmda — Displays HSMDA properties (applies only to the 7450 ESS and 7750 SR).
detail — Displays detailed information about the specified SAP egress policy.
Output
Sample Output
*A:Dut-T>config>port# show qos sap-ingress 10 detail
===============================================================================
QoS Sap Ingress
===============================================================================
-------------------------------------------------------------------------------
Sap Ingress Policy (10)
-------------------------------------------------------------------------------
Policy-id : 10 Scope : Template
Default FC : be Priority : Low
Criteria-type : None
Description : (Not Specified)
-------------------------------------------------------------------------------
Queue Mode CIR Admin PIR Admin CBS HiPrio PIR Lvl/Wt Parent
CIR Rule PIR Rule MBS CIR Lvl/Wt
Named-Buffer Pool
-------------------------------------------------------------------------------
1 Prio 0 max def def 1/1 None
closest closest def 0/1
(not-assigned)
11 Prio 0 max def def 1/1 None
closest closest def 0/1
(not-assigned)