QoS Scheduler Policies
Quality of Service Guide 539
• IES
• VPLS
• VPRN
Customer
Use the following CLI syntax to associate a scheduler policy to a customer’s multiservice
site:
CLI Syntax: config>customer customer-id
multiservice-site customer-site-name
egress
scheduler-policy scheduler-policy-name
ingress
scheduler-policy scheduler-policy-name
Epipe
Use the following CLI syntax to apply QoS policies to ingress and/or egress Epipe SAPs:
CLI Syntax: config>service# epipe service-id [customer customer-id]
sap sap-id
egress
scheduler-policy scheduler-policy-name
ingress
scheduler-policy scheduler-policy-name
config>service# epipe service-id [customer customer-id]
sap sap-id
egress
qos sap-egress-policy-id
ingress
qos sap-ingress-policy-id
The following output displays an Epipe service configuration with SAP scheduler policy
SLA2 applied to the SAP ingress and egress.
A:SR>config>service# info
----------------------------------------------
epipe 6 customer 6 vpn 6 create
description "Distributed Epipe service to west coast"
sap 1/1/10:0 create
ingress
scheduler-policy "SLA2"
qos 100
To Next Page
Loading...
