Alcatel-Lucent 7450 - Page 594

QoS Scheduler Policy Command Reference
594 Quality of Service Guide
Sample Output
*A:Dut-R# show qos scheduler-hierarchy sap 1/2/1:1 ingress detail
===============================================================================
Scheduler Hierarchy - Sap 1/2/1:1
===============================================================================
Legend :
(*) real-time dynamic value
(w) Wire rates
-------------------------------------------------------------------------------
Root (Ing)
| slot(1)
|--(S) : tplay
| | AdminPIR:960000 AdminCIR:960000(sum)
| |
| | [Within CIR Level 0 Weight 0]
| | Assigned:0 Offered:0
| | Consumed:0
| |
| | [Above CIR Level 0 Weight 0]
| | Assigned:0 Offered:0
| | Consumed:0
| |
| | TotalConsumed:0
| | OperPIR:960000
| |
| | [As Parent]
| | Rate:960000
| | ConsumedByChildren:960000
| |
| |--(S) : voice
| | | AdminPIR:max AdminCIR:max(sum)
| | |
| | | [Within CIR Level 6 Weight 1]
| | | Assigned:960000 Offered:120000
| | | Consumed:120000
Table 35: Show QoS Scheduler-Hierarchy SAP Output Fields
Label Description
Legend Admin CIR/PIR: Specifies the configured value of CIR/PIR.
Assigned CIR/PIR: Specifies the PIR/CIR rate given to a member by that
parent level.
Offered CIR/PIR: Specifies the offered load on that member.
Consumed CIR/PIR: Specifies the amount of scheduler bandwidth used by
this member.
PIR Specifies the PIR rate.
CIR Specifies the CIR rate.
S Displays the scheduler name.
Q Displays the queue ID and information.