Alcatel-Lucent 7450 - Page 601

QoS Scheduler Policies
Quality of Service Guide 601
Output Show QoS Scheduler-Hierarchy Subscriber Output
The following table describes the QoS scheduler hierarchy subscriber fields.
Sample Output
A:D# show qos scheduler-hierarchy subscriber RoutedCoHost1
===============================================================================
Scheduler Hierarchy - Subscriber RoutedCoHost1
===============================================================================
Root (Ing)
| slot(1)
|--(S) : grandpa
| |
| |--(S) : AccessIngress:Sub=1:1 200->1/2/5:1->8
| | |
| | |--(Q) : Sub=RoutedCoHost1:adsl-hsi 200->1/2/5:1->8 1/2
| | |
| | |--(Q) : Sub=RoutedCoHost1:adsl-hsi 200->1/2/5:1->8 2/1
| | |
| |
| |--(S) : AccessIngress:Sub=1:1 200->1/2/5:1->7
| | |
| | |--(Q) : Sub=RoutedCoHost1:adsl-hsi 200->1/2/5:1->7 1/2
| | |
| | |--(Q) : Sub=RoutedCoHost1:adsl-hsi 200->1/2/5:1->7 2/1
| | |
| |
| |--(S) : AccessIngress:Sub=1:1 200->1/2/5:1->6
| | |
| | |--(Q) : Sub=RoutedCoHost1:adsl-hsi 200->1/2/5:1->6 1/2
| | |
| | |--(Q) : Sub=RoutedCoHost1:adsl-hsi 200->1/2/5:1->6 2/1
| | |
| |
Table 36: Show QoS Scheduler-Hierarchy Subscriber Output Fields
Label Description
Legend Admin CIR/PIR: Specifies the configured value of CIR/PIR.
Assigned CIR/PIR: Specifies the PIR/CIR rate given to a member by
that parent level.
Offered CIR/PIR: Specifies the offered load on that member.
Consumed CIR/PIR: Specifies the amount of scheduler bandwidth
used by this member.
PIR Specifies the PIR rate.
CIR Specifies the CIR rate.
S Displays the scheduler name.
Q Displays the queue ID and information.