High Scale Ethernet MDA Capabilities
Quality of Service Guide 801
root-parent root-pool-id — Specifies the parent root pool to which the class pool will be
associated. All class pool parent associations are output when save config or show config is
executed regardless of whether the default value is currently set. The root-parent keyword is
required and must precede the root-pool-id parameter.
Values 1 — 8
allocation-percent percent-of-parent-pool — Defines the percentage of the root pool’s size to
define the size of the class pool. The value is specified as a percentage with two decimal
places (100th of a percent). All class pool percentage values are output when save config or
show config is executed regardless of whether the default value is currently set. The
allocation-percent keyword is required and must precede the percent-of-parent-pool
parameter.
root-tier
Syntax root-tier
Context config>qos>hsmda-pool-policy
Description This command enables the root pool tier context of an HSMDA pool policy. Within the root-tier
context, root pools may be sized by defining each root pool’s weight.
root-pool
Syntax root-pool root-pool-id allocation-weight pool-weight
no root-pool root-pool-id
Context config>qos>hsmda-pool-policy
Table 63: Root Pool ID Class Pool
Unit Integer
Default class-pool 1 1
Default class-pool 2 1
Default class-pool 3 1
Default class-pool 4 1
Default class-pool 5 1
Default class-pool 6 2
Default class-pool 7 2
Default class-pool 8 2
To Next Page
Loading...
