HSMDA Command Reference
814 Quality of Service Guide
2 — Specifies scheduling class 2 for the HSMDA WRR policy.
3 — Specifies scheduling class 3 for the HSMDA WRR policy.
class-agg-weight
Syntax class-agg-weight {1 | 2 | 4 | 8}
no class-agg-weight
Context config>qos>hsmda-wrr-policy
config>qos>hsmda-wrr-policy
Description This command specifies the aggregate weight within the scheduling class for the HSMDA WRR
scheduling loop policy.
The no form of the command removes an explicit aggregate weight value from the HSMDA WRR
policy.
Parameters 1 — Specifies the aggregate weight as 1 for the HSMDA WRR policy.
2 — Specifies the aggregate weight as 2 for the HSMDA WRR policy.
4 — Specifies the aggregate weight as 4 for the HSMDA WRR policy.
8 — Specifies the aggregate weight as 8 for the HSMDA WRR policy.
Show QoS HSMDA Commands
hsmda-pool-policy
Syntax hsmda-pool-policy [hsmda-pool-policy-name] [associations] [detail]
Context show>qos
Description This command displays HSMDA pool policy information.
Parameters hsmda-pool-policy-name — Displays information about the specified HSMDA pool policy up to
32 characters in length.
associations — Displays entities associated with the specified HSMDA pool policy.
detail — Displays detailed information.
Output
Sample Output
*A:ALA-48>show>qos# hsmda-pool-policy
===============================================================================
To Next Page
Loading...
