EasyManua.ls Logo

Alcatel-Lucent 7450 - Page 83

Alcatel-Lucent 7450
912 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Network QoS Policies
Quality of Service Guide 83
ND (NDIS) NC2 NC
NTP/SNTP NC1 NC
OSPF NC1 NC
PECP NC1 NC
PIM NC1 NC
PPPoE N/A NC
PTP NC1 NC
RADIUS AF41 NC
RIP NC1 NC
RSVP NC1 NC
sFlow NC1 NC
SNMP AF41 NC
SRRP NC1 NC
SSH AF41 NC
Syslog AF41 NC
TACACS+ AF41 NC
Telnet AF41 NC
TFTP AF41 NC
Traceroute BE NC
VRRP NC1 NC
Table 18: Default QoS Values for Self-Generated Traffic (Continued)
Protocol DSCP FC
Note: ICMP echo requests (type 8) initiated from the router will use the DSCP value set by
the sgt-qos command. The FC value is NC by default, or the value specified in the ping
command parameter fc fc-name.
Note: Configurable values for BFD are not supported.

Table of Contents

Other manuals for Alcatel-Lucent 7450

Related product manuals