Rockwell Automation Publication 1783-UM007G-EN-P - February 2017 287
Configure Switch Features Chapter 7
To create a NAT instance, follow these steps.
1. From the NAT view, click New Instance to display the Ports view.
IMPORTANT Configure all Smartport roles and VLANs before creating NAT instances.
If you change a Smartport role or the native VLAN for a port that is
associated with a NAT instance, you must reassign VLANs to the NAT
instance.
IMPORTANT As a result of Layer 2 forwarding, current traffic sessions remain established
until manually disconnected. If you change an existing translation, you must
manually disconnect all associated traffic sessions before the new
translation can take effect.
To Next Page
Loading...
