Manual Rapid Advance
Manual Rapid Advance allows the user to quickly advance
through an active cycle or advance into a cycle from the Ready
Mode. This feature is useful when tests must be performed imme-
diately on a machine currently in an active cycle. In this case, the
user can quickly advance through the cycle to the Ready Mode.
At this point, the user can perform the required tests and then re-
turn the machine to the active cycle.
How to Enter Rapid Advance
1. If control is in Ready Mode, control must be put into Manual
Mode. Refer to Entering Manual Mode.
2. Press the Delicates Bulky (∧) or the Cold (∨) keypad until
rAPid appears in the display.
3.
Press the START (enter) keypad. The display will show PUSH
then StArt followed by the cycle time and the START (en-
ter) keypad LED will flash.
NOTE: Door must be closed to start cycle.
4. Press the START (enter) keypad to start cycle, or if already in
an active cycle, pressing START (enter) keypad will advance
to the next cycle step.
NOTE: The Rapid Advance option must be turned
on for Rapid Advance to work.
How to Exit Rapid Advance Feature
Advance through the cycles until reaching the Ready Mode.
Manual Rapid Advance
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
167 Part No. F8615401ENR4
To Next Page
