Alliance Laundry Systems DCG020ND - Programming Control; Programmable Options Available

Programming Control
What Can Be Programmed?
This feature allows the owner to program cycle parameters,
standard vend pricing, special vends and other features by using
the keypads. The control must have the Manual Programming
Mode enabled, which is the factory default. This mode can only
be turned oFF and on by using an external device (refer to Com-
munications).
This section offers a detailed description of all available program-
mable options. Each description includes instructions on when
and why the option might be used and how to program the op-
tion.
For more advanced operators, see the quick reference list (refer to
Programmable Options Available Programmable Options Availa-
ble) and programming flowcharts (refer to Manual Mode Naviga-
tion) for the options available through the programming mode.
NOTE: The codes in the Option Display column of Pro-
grammable Options Available are displayed when that op-
tion is selected.
Programmable Options Available
Option Number Option Display Description Factory Default* Value Range
1
AtS 1
Vend Price #1 200 0-65,535
2
AtS 2
Vend Price #2 200 0-65,535
3
AtS 3
Vend Price #3 200 0-65,535
4
AtS 4
Vend Price #4 200 0-65,535
5
AtS 5
Vend Price #5 200 0-65,535
6
AtS 6
Vend Price #6 200 0-65,535
7
AtS 7
Vend Price #7 200 0-65,535
8
AtS 8
Vend Price #8 200 0-65,535
9
AtS 9
Vend Price #9 200 0-65,535
10
ACNP 1
Deluxe Vend Price Add-
er
25 0-65,535
11
ACNP 2
Ultra Vend Price Adder 25 0-65,535
12
Ats dP
Vend Price Decimal
Point
2 0, 2, 3
13
dEn 1
Coin #1 Value 25 1-65,535
14
dEn 2
Coin #2 Value 100 1-65,535
15
PLSE
Start Pulse Value 25 1-65,535
16
PLSNod
Start Pulse Mode 128
oFF, 128, 192
17
AtyPE
Programmable Output
Type
0 0-13
18
dFtCyC
Default Cycle 3 1-9
19
CArd
Card Reader Display
Control (If Equipped)
oFF on/oFF
Table 1 continues...
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
29 Part No. F8615401ENR4