Daylight Savings Option Menu dLS-
This option allows the owner to set the controls internal clock to
the daylight savings time and date.
1. Control must be in Manual Mode. Refer to Entering the Man-
ual Mode.
2. Press the Delicates Bulky (∧) or the Cold (∨) keypad until
Prog appears in the display. Press the START (enter) keypad
and AtS 1 will appear in the display.
3. Press the Delicates Bulky (∧) or the Cold (∨) keypad to scroll
through the programmable options until dLS- appears in the
display. Press the START (enter) keypad and dLS 1 will ap-
pear in the display.
4. Press the Delicates Bulky (∧) or the Cold (∨) keypad to scroll
through the programmable options. Refer to Table 8 .
dLS 1
Daylight Saving (On/Off)
dLS 2
Start Month
dLS 3
Start Day of Week
dLS 4
Start Week of Month
dLS 5
Start Hour
dLS 6
End Month
dLS 7
End Day of Week
dLS 8
End Week of Month
dLS 9
End Hour
Table 8
5. When the desired option appears in the display, press the
START (enter) keypad. The current value will appear in the
display.
6. Press the Delicates Bulky (∧) or the Cold (∨) keypad to in-
crease or decrease the minutes, hours, day of week, date of
month, month or year to the correct time or date.
NOTE: The hours will be displayed in 24 hour for-
mat. For day of week, Sunday is considered day one
(1), Monday is day two (2) and so on. For year, the
year 2000 is “ 0 ”, the year 2001 is “ 1 ” and so on.
For week of month, first week is "1", second week is
"2", third week is "3", and last week is "4".
NOTE: To go back to the current programmable op-
tion without changing the value of the active digit,
press the Warm (<) keypad.
7. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
63 Part No. F8615401ENR4
To Next Page
Loading...
