Vend Price #8 AtS 8
This option allows the owner to set the vend price for Delicates
Bulky Warm. This vend price will be shown in the display when
Delicates Bulky Warm is selected.
1. Control must be in Manual Mode. Refer to Entering the Man-
ual Mode.
2. Press the Delicates Bulky (∧) or the Cold (∨) keypad until
Prog appears in the display. Press the START (enter) keypad.
3.
AtS 1 will appear in the display. The keypad LED will be lit
to show which cycle price is being programmed.
4. Press the Delicates Bulky (∧) or the Cold (∨) keypad to scroll
through the programmable options. When AtS 8 appears in
the display, press the START (enter) keypad.
5. The Delicates Bulky and Warm LEDs will be lit to show
which cycle/temperature price is being programmed.
6. Press the Delicates Bulky (∧) or the Cold (∨) keypad to in-
crease or decrease the value of the active digit and the START
(enter) keypad to enter the value of the digit and advance to
the next digit.
NOTE: To go back to the current programmable op-
tion without changing the value of the active digit,
press the Warm (<) keypad.
7. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Vend Price #9 AtS 9
This option allows the owner to set the vend price for Delicates
Bulky Cold. This vend price will be shown in the display when
Delicates Bulky Cold is selected.
1. Control must be in Manual Mode. Refer to Entering the Man-
ual Mode.
2. Press the Delicates Bulky (∧) or the Cold (∨) keypad until
Prog appears in the display. Press the START (enter) keypad.
3.
AtS 1 will appear in the display. The keypad LED will be lit
to show which cycle price is being programmed.
4. Press the Delicates Bulky (∧) or the Cold (∨) keypad to scroll
through the programmable options. When AtS 9 appears in
the display, press the START (enter) keypad.
5. The Delicates Bulky and Cold LEDs will be lit to show which
cycle/temperature price is being programmed.
6. Press the Delicates Bulky (∧) or the Cold (∨) keypad to in-
crease or decrease the value of the active digit and the START
(enter) keypad to enter the value of the digit and advance to
the next digit.
NOTE: To go back to the current programmable op-
tion without changing the value of the active digit,
press the Warm (<) keypad.
7. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
48 Part No. F8615401ENR4
To Next Page
Loading...
