Special Vend 1 Wash Status Agitate Steps Added
Minutes SP1 20
This option allows the owner to add time to any agitate steps that
have their status set to Wash in Special Vend 1.
1. Press the Delicates Bulky (∧) or the Cold (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
20 appears in the display.
2.
When SP1 20 appears in the display, press the START (en-
ter) keypad. The current value will appear in the display.
NOTE: To go back to the current programmable
Special Vend 1 option without changing the value,
press the Warm (<) keypad.
3. Press the Delicates Bulky (∧) or the Cold (∨) keypad to in-
crease or decrease the number of minutes displayed to the de-
sired number of added minutes.
NOTE: To go back to the current programmable op-
tion without changing the value of the active digit,
press the Warm (<) keypad.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Special Vend 1 Wash Status Agitate Steps Sub-
tracted Minutes SP1 21
This option allows the owner to subtract time from any agitate
steps that have their status set to Wash in Special Vend 1.
1. Press the Delicates Bulky (∧) or the Cold (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
21 appears in the display.
2.
When SP1 21 appears in the display, press the START (en-
ter) keypad. The current value will appear in the display.
3. Press the Delicates Bulky (∧) or the Cold (∨) keypad to in-
crease or decrease the value of the active digit and the START
(enter) keypad to enter the value of the digit and advance to
the next digit.
NOTE: To go back to the current programmable op-
tion without changing the value of the active digit,
press the Warm (<) keypad.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Special Vend 1 Cycle Modifier Default Value SP1
22
This option allows the owner to set the default cycle modifier that
should be selected any time that Ready Mode is entered.
0 = No Modifiers
1 = Deluxe
2 = Ultra
1. Press the Delicates Bulky (∧) or the Cold (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
22 appears in the display.
2.
When SP1 22 appears in the display, press the START (en-
ter) keypad. The current value will appear in the display.
3. Press the Delicates Bulky (∧) or the Cold (∨) keypad to in-
crease or decrease the value of the active digit and the START
(enter) keypad to enter the value of the digit and advance to
the next digit.
NOTE: To go back to the current programmable op-
tion without changing the value of the active digit,
press the Warm (<) keypad.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
74 Part No. F8615401ENR4
To Next Page
Loading...
