Special Vend 1 Start Date SP1 4
This option allows the owner to set the date that Special Vend 1
will begin.
NOTE: If Special Vend 1 Start Month, Start Date, End
Month, or End Date are programmed to zero (0), the
Special Vend 1 will be active every week on the days
programmed in Table 9 .
1. Press the Delicates Bulky (∧) or the Cold (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
4 appears in the display.
2.
When SP1 4 appears in the display, press the START (enter)
keypad. The current start date will appear in the display.
3. Press the Delicates Bulky (∧) or the Cold (∨) keypad to in-
crease or decrease the start month to the desired month.
NOTE: To go back to the current programmable op-
tion without changing the value of the active digit,
press the Warm (<) keypad.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Special Vend 1 Start Month SP1 5
This option allows the owner to set the month that Special Vend 1
will begin.
NOTE: If Special Vend 1 Start Month, Start Date, End
Month, or End Date are programmed to zero (0), the
Special Vend 1 will be active every week on the days
programmed in Table 9 .
1. Press the Delicates Bulky (∧) or the Cold (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
5 appears in the display.
2.
When SP1 5 appears in the display, press the START (enter)
keypad. The current start month will appear in the display.
3. Press the Delicates Bulky (∧) or the Cold (∨) keypad to in-
crease or decrease the start month to the desired month.
NOTE: If “off” is selected and Special Vend 1 is on,
Special Vend 1 will occur at the time and days of
week selected, regardless of the month.
NOTE: To go back to the current programmable op-
tion without changing the value of the active digit,
press the Warm (<) keypad.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Special Vend 1 Start Year SP1 6
This option allows the owner to set the month that Special Vend 1
will begin.
1. Press the Delicates Bulky (∧) or the Cold (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
6 appears in the display.
2.
When SP1 6 appears in the display, press the START (enter)
keypad. The current start year will appear in the display.
3. Press the Delicates Bulky (∧) or the Cold (∨) keypad to in-
crease or decrease the start year to the desired year.
NOTE: If “off” is selected and Special Vend 1 is on,
Special Vend 1 will occur at the time or days of week
selected, regardless of the year. “1” is year 2001,
“2” is year 2002, and so on.
NOTE: To go back to the current programmable op-
tion without changing the value of the active digit,
press the Warm (<) keypad.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Special Vend 1 Length in Hours SP1 7
This option allows the owner to set the length in hours for Special
Vend 1.
1. Press the Delicates Bulky (∧) or the Cold (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
7 appears in the display.
2.
When SP1 7 appears in the display, press the START (enter)
keypad. The current length in hours will appear in the display.
3. Press the Delicates Bulky (∧) or the Cold (∨) keypad to in-
crease or decrease the current value to the desired number of
hours.
NOTE: To go back to the current programmable op-
tion without changing the value of the active digit,
press the Warm (<) keypad.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
70 Part No. F8615401ENR4
To Next Page
Loading...
