Special Vend 1 End Date SP1 8
This option allows the owner to set the date of the month that
Special Vend 1 will end.
NOTE: If Special Vend 1 Start Month, Start Date, End
Month, or End Date are programmed to zero (0), the
Special Vend 1 will be active every week on the days
programmed in Table 9 .
1. Press the Delicates Bulky (∧) or the Cold (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
8 appears in the display.
2.
When SP1 8 appears in the display, press the START (enter)
keypad. The current end date will appear in the display.
3. Press the Delicates Bulky (∧) or the Cold (∨) keypad to in-
crease or decrease the value to the desired date.
NOTE: If OFF is selected and Special Vend 1 is ON,
Special Vend 1 will occur at the time or days of week
selected, regardless of the date.
NOTE: To go back to the current programmable op-
tion without changing the value of the active digit,
press the Warm (<) keypad.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Special Vend 1 End Month SP1 9
This option allows the owner to set the month that Special Vend 1
will end.
NOTE: If Special Vend 1 Start Month, Start Date, End
Month, or End Date are programmed to zero (0), the
Special Vend 1 will be active every week on the days
programmed in Table 9 .
1. Press the Delicates Bulky (∧) or the Cold (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
9 appears in the display.
2.
When SP1 9 appears in the display, press the START (enter).
The current end month will appear in the display.
3. Press the Delicates Bulky (∧) or the Cold (∨) keypad to in-
crease or decrease the value to the desired month.
NOTE: If OFF is selected and Special Vend 1 is ON,
Special Vend 1 will occur at the time and day of
week selected, regardless of the month.
NOTE: To go back to the current programmable op-
tion without changing the value of the active digit,
press the Warm (<) keypad.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Special Vend 1 End Year SP1 10
This option allows the owner to set the year that Special Vend 1
will end.
1. Press the Delicates Bulky (∧) or the Cold (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
10 appears in the display.
2.
When SP1 10 appears in the display, press the START (en-
ter) keypad. The current end year will appear in the display.
3. Press the Delicates Bulky (∧) or the Cold (∨) keypad to in-
crease or decrease the value to the desired year.
NOTE: If “off” is selected and Special Vend 1 is on,
Special Vend 1 will occur at the time or days of week
selected, regardless of the year. “1” is year 2001,
“2” is year 2002 and so on.
NOTE: To go back to the current programmable op-
tion without changing the value of the active digit,
press the Warm (<) keypad.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Special Vend 1 Price #1 SP1 11
This option allows the owner to set the vend price for all cycles,
but otherwise specifically for Regular. This price should be set
before all other prices. The corresponding LED will be lit while
programming.
1. Press the Delicates Bulky (∧) or the Cold (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
11 appears in the display.
2.
When SP1 11 appears in the display, press the START (en-
ter) keypad. The current value will appear in the display.
3. Press the Delicates Bulky (∧) or the Cold (∨) keypad to in-
crease or decrease the value of the active digit and the START
(enter) keypad to enter the value of the digit and advance to
the next digit.
NOTE: To go back to the current programmable op-
tion without changing the value of the active digit,
press the Warm (<) keypad.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
71 Part No. F8615401ENR4
To Next Page
Loading...
