Special Vend 1 Extract Speed Limit SP1
27
1. Press the Delicates Bulky (∧) or the Cold (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
27 appears in the display.
2.
When SP1 27 appears in the display, press the START (en-
ter) keypad. The current value will appear in the display.
NOTE: To go back to the current programmable
Special Vend 1 option without changing the value,
press the Warm (<) keypad.
3. Press the Delicates Bulky (∧) or the Cold (∨) keypad to in-
crease or decrease value of the speed to be limited. Keep the
speed at the highest programmable value for no limit to the
spin speed.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Special Vend 2 Days of Week Enable
SP2
This option allows the owner to enable or disable a second spe-
cial vend. Special Vend 2 can be programmed using an external
device. The owner may also turn the Special Vend 2 option on or
off.
1. Control must be in Manual Mode. Refer to Entering the Man-
ual Mode.
2. Press the Delicates Bulky (∧) or the Cold (∨) keypad until
Prog appears in the display. Press the START (enter) keypad
and AtS 1 will appear in the display.
3. Press the Delicates Bulky (∧) or the Cold (∨) keypad to scroll
through the programmable options until SP2 appears in the
display.
4.
When SP2 appears in the display, press the START (enter)
keypad. The current Special Vend 2 Days Enable status will
appear in the display.
on = Option Enabled
oFF = Option Disabled
NOTE: To go back to the current programmable op-
tion without changing the value of the active digit,
press the Warm (<) keypad.
5. Press the Delicates Bulky (∧) or the Cold (∨) keypad to
change the current status.
6. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Special Vend 3 Days of Week Enable
SP3
This option allows the owner to enable or disable third special
vend. Special Vend 3 can be programmed using an external de-
vice or network. The owner may also turn the Special Vend 3 op-
tion on or off.
1. Control must be in Manual Mode. Refer to Entering the Man-
ual Mode.
2. Press the Delicates Bulky (∧) or the Cold (∨) keypad until
Prog appears in the display. Press the START (enter) keypad
and AtS 1 will appear in the display.
3. Press the Delicates Bulky (∧) or the Cold (∨) keypad to scroll
through the programmable options until SP3 appears in the
display.
4.
When SP3 appears in the display, press the START (enter)
keypad. The current Special Vend 3 Days Enable status will
appear in the display.
on = Option Enabled
oFF = Option Disabled (factory default setting)
NOTE: To go back to the current programmable op-
tion without changing the value of the active digit,
press the Warm (<) keypad.
5. Press the Delicates Bulky (∧) or the Cold (∨) keypad to
change the current status.
6. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
76 Part No. F8615401ENR4
To Next Page
Loading...
