Alliance Laundry Systems DCG020ND - Page 28

CHM1903REN_SVG
rAPid
Rapid Advance
Prog
Manual Programming
AUdit
Manual Read
Audit
rESEt
Manual Reset
diAg
Diagnostic
Tests
Press the START keypad to
begin Rapid Advance cycle and
to advance through cycle steps.
Press the START keypad to
enter Manual Programming.
Refer to Manual
Programming flowchart.
CyCLES
Total machine cycles
Coin 1
Total coins #1
PULSE
Total start pulses
Coin 2
Total coins #2
Press the START keypad to enter
Manual Reset Mode.
Press the START keypad to
enter Diagnostic Tests. Refer to
Diagnostic Tests flowchart.
Press the START (enter)
keypad to read audit.
Press the START (enter)
keypad to read audit.
Press the START (enter)
keypad to read audit.
Press the START (enter)
keypad to read audit.
rAPCyC
Total Rapid Advance Cycles
rCoin1
Resettable Coin #1 count
rUnHrs
Total run hours
Press the START (enter)
keypad to read audit.
Press the START (enter)
keypad to read audit.
Press the START (enter)
keypad to read audit.
rCoin2
Resettable Coin #2 count
Press the START (enter)
keypad to read audit.
rCyCLE
Resettable Machine Cycle count
Press the START (enter)
keypad to read audit.
Figure 4
Entering the Manual Mode
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
28 Part No. F8615401ENR4