Alliance Laundry Systems DCG020ND - Page 95

Programming the Cool Down Step Type
The Cool Down Step Type allows the owner to program a soak
step in a cycle. The Cool Down Step Type is identical to the Agi-
tate Step Type except that it allows hours and minutes to be pro-
grammed rather than minutes and seconds. After selecting the de-
sired Cycle Step number and pressing START (enter), XXCLdn
will appear in the display. Press the Delicates Bulky (∧) or the
Cold (∨) keypad to scroll through the options and START (enter)
to select a value.
NOTE: To go back to the current programmable option
without changing the value of the active digit, press the
Warm (<) keypad.
Step
Type
Display
A Display B Values Description
XXCLdn Cool Down Step Type (XX is step number, step type is
flashing)
En diS XXCL01 EnAbLe/diSAbL/dNod 1/
dNod 2
Step Enable/Disable
Choosing dNod 1 and dNod 2 will enable the step
if the cycle modifier is chosen and set to be enabled
in Cycle Modifier Programming Menu CNP-.
StAtUS XXCL02 PrEWSH/WASH/rinSE1/
rinSE2/rinSE3/rinSE4/
SPin
Status LED: The corresponding LED on the control
will be lit during this step.
W tENP XXCL03 g CooL /
Cool Down Temperature (refer to Heating/Cool Down
Display Sequence (Heat Models))
tyPE XXCL04 PLU Co/No Wri
Plumbing Code/Wrinkle
rAtE XXCL05
no/ 0.5 - 12.5°F/Minute [0.3
- 6.9°C/Minute]
Cooldown Rate
rotAtE XXCL06
3-255 Motor On Time (seconds)
PAUSE XXCL07
3-255 Motor Off Time (seconds)
SPEEd XXCL08 no rot/LoW Ag/rEg Ag/
10-50 RPM (X.XX-X.XX G
Force)
Rotation Speed: no rotation, low agitate speed, regu-
lar agitate speed or custom speed in RPM/G Force
• 0.03-0.75 for 20 pound
• 0.04-0.86 for 30 pound
• 0.04-0.94 for 40 pound
• 0.05-1.07 for 60 pound
• 0.06-1.27 for 80 pound
• 0.06-1.27 for 100 pound
rEvErS XXCL09 rEv on/no rEv
Reversing
v tENP XXCL10 CoLd/WArN/Hot
Water Valve Temperature: Cold (cold valve), Warm
(cold and warm valves), Hot (hot valves)
FiLL XXCL11 on/oFF
Fill Valves
Fi tUb XXCL12 on/oFF
Tub Fill Valves (if so equipped)
SPrAY XXCL13 on/oFF
Spray Valves (if so equipped)
C HArd XXCL14 on/oFF
Cold Hard Fill Valve (if so equipped)
AUX FL XXCL15 on/oFF
Auxiliary Fill Valve (if so equipped)
Table 21 continues...
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
95 Part No. F8615401ENR4