Amada LW500A - Shipping Precautions

LW500A/LW600A PULSED Nd:YAG LASER
990-539 xvii
Shipping Precautions
 Fix the Laser firmly using belts, cushions,
etc., to prevent an accidental fall or damage
due to vibration.
 Retract the level adjuster fully when
freighting the Laser.
 Insert a board and thick cushion between the
front door and wall to provide enough
clearance between the wall and the upper
front panel of the Laser.
 Insert wood between the bottom of the Laser and floor to balance the Laser.
 Belt and fix the laser using at least two planes of floor and wall. Be sure to use cushions
between the Laser and the belt(s) to prevent damaging the laser.