LW500A/LW600A PULSED Nd:YAG LASER
990-539 ix
SAFETY PRECAUTIONS
Before using this equipment, read the Safety
Precautions
carefully to understand the correct
usage of the equipment.
These precautions are given for safe
use of the Laser and for prevention of
injury to operators or others.
Be sure to read each of the instructions,
as they are all important for safe
operation.
The meaning of the words and symbols
are as follows:
DANGER
DO NOT TOUCH THE INSIDE OF THE LASER UNNECESSARILY.
High voltages are present inside the equipment cabinet. Do not touch the inside of the
Laser unnecessarily with the power turned ON.
NEVER DISASSEMBLE, REPAIR, OR MODIFY THE LASER.
These actions can cause electric shock and fire. Do not do anything other than the
maintenance described in the Operator Manual.
DO NOT LOOK AT OR TOUCH THE LASER BEAM.
Both direct laser beams and reflected laser beams are highly dangerous. If the beam
enters the eye directly, it can cause blindness.
To Next Page
Loading...
