LW500A/LW600A PULSED Nd:YAG LASER
viii 990-539
CONTACT US
Thank you for purchasing a Miyachi Unitek Pulsed Nd:YAG Laser. Upon
receipt of the laser, please thoroughly inspect it for shipping damage before you
install it. If there is any damage, contact the shipping company immediately to
file a claim, and notify us at:
Amada Miyachi America
1820 South Myrtle Avenue
P. O. Box 5033
Monrovia, California 91016
Phone: (626) 303-5676
FAX: (626) 358-8048
E-mail: info@amadamiyachi.com
The contents of this manual are subject to change without notice. If you have
any questions, or find any errors or omissions in this manual, please contact us.
Amada Miyachi America is not responsible for any losses or injury due to the
improper use of this product.
It is our intent to strive for quality in workmanship and materials with every
Laser Welder we manufacture. It is important that you read and understand this
manual before attempting installation or operation.
CDRH COMPLIANCE STATEMENT
The Miyachi Unitek LW500A(E)/LW600A(E) and Amada Miyachi ML-
2651B(-CE)/ML-2650B(-CE) Nd:YAG Lasers are certified to be fully
compliant with all applicable standards and regulations as set forth by the
United States of America’s Health and Human Services (HHS), Food and
Drug Administration (FDA), Center for Devices and Radiological Health
(CDRH), title 21 Code of Federal Regulations (CFR) sections 1002, 1010,
and 1040 for Class IV laser devices.
Reference CDRH Accession number is available upon request.
To Next Page
Loading...
