CHAPTER 1: SYSTEM DESCRIPTION
LW500A/LW600A PULSED Nd:YAG LASER
1-6 990-539
7 Solenoid Valve Cover. Covers the solenoid valve used to control the flow-rate of the primary
cooling water.
8 Cooling Water Outlet. For the primary cooling water. Connect to an external cooling unit (chiller).
9 Cooling Water Inlet. For the primary cooling water. Connect to an external cooling unit (chiller).
10 Air Filters. Covers the air intake to prevent dust and dirt from getting into the Laser. The main
cooling fans for the electronic assemblies are behind these filters.
11 Side Covers. Located on both sides of the Laser, they cover the Laser Power supplies and Cooler.
12 Operation Panel. This panel tilts forward to allow you to remove the forward Head Cover.
13 Head Covers A & B. Covers the laser oscillator.
14 Control Unit Cover. Covers the control PC board Unit.
To Next Page
